Electric Stainless Steel Steam Generator with pressure relief valve

Electric Stainless Steel Steam Generator with pressure relief valve

Quick Detail:

1. Type: Wet Steam Sauna
2. control panel: digital and optional
3. Power output: 7.5kw
4. voltage: 220V/400V
5. Main Material: stainless steel tank, galvanizing and powder coated shell
6. Color: grey green
7. Current:31.8A/11.4A
8. phase: 1/3
9. Auto protection: over-heat protect, boil dry protect, pressure balancing valve, leakage protect, lack of water protect and the others
10. Auto function: auto water inlet , auto drain, auto flushing, auto power off
11. Shape: Cuboid
12. Size: 475*185*450mm
13. Room volume(cubic meter): 5.5~8.5
14. Usage: steam sauna room
15. working time: 1~60 minutes or long time
16. Heating: heat elements
17. Power source: Electric
18. Time Setting: 1-60mins
19. Temperature range to control: 95 F degree~131 F degree
20. Temperature range to show on control panel: 43 F degree ~140 F degree

7.5kw Automatic Sauna Steam Generator with pressure relief valve

Our KSA-E steam generator mainly have below functions:

• Classic shape
• Intelligent to indicate fault with the code.
• When controller shows CH can working for long
• It Can pause at working
• Intelligent to save two sets of temperature, can individual set time by memory
• Intelligent to heat by segment, fill water with steam, automatic to turn off , a self flushing cycle ,with pressure to drain.
• Light can be connected to controller, water inflow to magnetize and filtrate etc.

Description:

How to install them?

Water inlet:  First connect the water magnetizer (if applicable) to the water inlet solenoid valve. Then please use a 1/2’’ flexible stainless steel hose to connect the other side of the water magnetizer and the water supply pipeline. Do not connect to metal water supply pipeline directly which may damage the water inlet valve. Only use cold water supply.

Steam outlet:  Use no less than 1/2’’ copper pipe to connect the steam head and the steam outlet pipe of the generator. The pipe should be less than 3 meters long and minimize the number of elbows, otherwise heat isolating methods should be implemented.

Steam head:  The steam head should be about 300mm from the ground and at least 150mm from customer seats. Please apply silicone glue on the steam pipe nipple and back of the steam head, and then screw the steam head on to the steam pipe nipple. Please refer to part A in figure 7, the Aromatherapy reservoir should face upwards.

Drain pipe: Please use 1/2’’ copper pipe to connect the drain outlet and the drain pipeline of the house. Similarly, use 1/2’’ copper pipe to connect the safety valve and the drain pipeline of the house. The drain pipeline should be installed with small angle so as to help residual water in the steam generator flow to the drain pipe.

More detail please contact us at [email protected]

Applications:

For steam bath, Turkish bath and public sauna or hotel.

Specifications:

Pressure relief valve KSA-E75 steam generators 7.0kw/220v-230v/400v  for Turkish bath with automatic flushing

1. Control panel with Digital display
2. Control panel used the advanced inducing technology
3. Controls sauna temperature 35 degree to 55 degrees
4. Controls sauna time 1 minute to 60 minutes or long time
5. Intelligent to heat by segment
6. Intelligent to fill water with steam
7. Intelligent to do a self flushing cycle
8. Light can be connected to controller
9. Intelligent to indicate fault with the code
10. Can pause at working
11. To show CH can working for long
12. Intelligent to save two sets of temperature, can individual set time by memory
13. Automatically shuts down when water level is too low
14. Temperature high limit switch
15. Waterproof grade: IPX5
16. Auto protection: over-heat protect, boil dry protect, pressure balancing valve, leakage protect, lack of water protect and the others
17. Auto function: auto water inlet , auto drain, auto flushing, auto power off

We will provide some spare parts to our customer as replacement.

Technical Data

KSA-E75

Competitive Advantage:

This KSA-E 75 steam generator with 3pcs 2.5kw heating elements is ideal for middle size steam rooms. The 7.5 kW is available either 3-Phase or 1-Phase convertible to 3-Phase connection. These steam generators are ideal for heavy use steam rooms

Thank you for choosing KSA-E series steam generator with well-designed structure, steady performance and convenient installation. To form the whole set of steam bathing equipment, you need a personal steam bathing room as well. The steam generator is designed to remove tiredness, relax muscles and stimulate blood circulation.